Iron.X / Iron.X LS
Iron contaminants remover for car paint,
Wheel Glass and Plastic. pH neutral - safe to use
Highly effective, acid-free and pH balanced (6~7pH) car paint, wheels & glass cleaner (safe for all wheels including aluminum/Chromes/Anodized and alloys). This formulation is also effective and safe for use on all car surfaces and will not deteriorate clear coats. This preventative measure puts a stop to corrosion , contains unique chemical ingredients that effectively dissolves the sintered iron by forming a water soluble iron complex. No other method cleans paint and wheels as deeply as . The Paint and wheels Decontamination System was developed as a method of removing paint contamination beyond what can be removed by washing or claying !!. If you are familiar with detail clay, you know it is capable of removing above surface contaminants that have bonded to the paint. The is designed to remove what lies below the paint surface.
Starting from Sept. 2013 we complete the IronX line with a new version , The IronX LS (Lemon Scent) no more harsh Odor , with same power decontamination as before!
Airborne chemical compounds and ferrous particles - particles containing iron - actually penetrate the paint and create corrosive compounds that eat deep into the paint's sub-layers or paint's pin-holes. This is a gradual process that often is not evident until it's too late. Claying or polishing only removes the particle, not its effects, which are continuing to spread beneath the surface.
During the use of your vehicle, brake dust and road grime become sintered to the surface of the car paint , rims and wheels due to the high temperature conditions they are normally exposed. Brake dust contains high levels of iron and once sintered to the rim, becomes extremely difficult to dissolve or remove without the use of harsh chemicals. opens up the paint's pores to release ferrous particles and to neutralize caustic compounds that have developed in the paint's subsurface. Ongoing damage is immediately stopped and future damage is prevented by removing the ferrous particles.
sprays on as a thick, transparent, as the cleansing liquid begins to work into the dirt and grime, the formula begins to turn purple/ red. The purple/red coloration is the Cleaner forming a bond to the sintered iron on the car paint and wheel and changing its state to a water soluble complex for easy removal. Stubborn, baked on grime may take a small amount of agitation. Rinse car paint and wheels thoroughly with a power washer and wipe dry.
The is used by body shops for pre-cleaning prior to detailing and by dealerships for new and used car prep. It is proven to deliver a clean, glassy smooth vehicle that is protected from the harmful effects of paint contamination. No other is as fast and effective at removing multi-layer paint and wheels contamination.
|Spray On||Result After Wash|
Reaction on Car Paintwork
How to Use
1. Wash the car or wheels surfaces, make sure surface is in cool temp.
2. Shake well, spray on the surface,rub it in with damp sponge thoroughly, wait 5 min. while contaminants change its color to purple/red, wipe off with damp soft sponge. IronX can be dried on surface but not under sunshine!!
3. Rinse well or power wash the whole surface. Car is ready to clay now.
Average consumption per car: 100 ~ 150ml.
Shelf life: 1 year if kept closed in cool, dry place.
IronX is the most essential step before any polishing work done on the car which no other cleaner can do.
IronX is very important to use before C.quartz application.
Here are a quick test reviews done by few of the best detailers in the UK :
1. To be safe, check the spray on such area which does not cause noticeable stains before the whole application.
2. Unpainted plastic parts and rubber can be sprayed. If attached, before drying Please rinse well.
ironX will affect oily Wax layer by 50% ,if the car had wax on it. sythethic sealant it will not affect !
3. Avoid spraying under direct sunlight or hot surface.
3.5 Avoid as much as possible spraying on the brake calipers , Iron.X might affect after market acrylic lack surfaces.
IronX is safe to use on 3M protection films, Chrome trims and panels !
4. Please work in adequate ventilated space (we strongly suggest using face mask while working, not for IronX LS).
5. Wash hands after handling with water.
6. If swallowed, do not induce vomiting, immediately rinse your mouth, please get medical attention.
7. Eye and skin contact, please wash with water.
8. Avoid reach of children's.