Responsive Slide Show

PolyShave


We offer the latest polymer /rubber technology for contaminant removing. the PolyShave line !

Quick "shaving" surface contaminants leaving smooth to touch .

Eliminate hands and fingers fatigue

Outlast conventional clay bar up to 4 times longer.

Fine grade rubber, will not marr car surface .

Re-usable : no contaminants attached.

we offer PolyShave block for hand application, PolyShave pad for DA polish machine, and MF +rubber face.

Pad diameter : 150mm
Block size : 10 x 7 x 4cm
MicroFiber +Rubber : 30 x 30cm


Thoroughly wash vehicle prior to application.
How to use :

2.  With your favorite showroom prep or clay lubricant, spray a generous amount onto the working surface and on the polymerized rubber surface of thePolyShave.

3.  Using light pressure, gently slide PolyShave from side to side. When PolyShave glides freely, the surface contaminants have been removed.

4.  Wipe off the residual lubricant with a separate microfiber towel. Rub your hand across the surface; It should be as smooth as glass. If not, you can repeat the process.

5.  Continue these steps until you have completed the entire vehicle.
Note:  For less possible marring we suggest  to wear off the polyshave on glass surface before using on car Paint !
by rubbing it with lube on glass surface.

 

Care Instructions:

After each use, simply rinse the PolyShave  in warm water... no soap required.

Note ! : Always keep the surface well lubricated while using the PolyShave !!
Plain water is NOT an adequate lubricant.

DO NOT use with rotary polisher.